🧮 Professional Asphalt Calculator

Advanced asphalt calculation tool with comprehensive features for all project types

📏 Project Measurements

Enter your project dimensions with unit selection

Driveway: 2-3 in, Parking: 3-4 in, Highway: 6+ in

📦 Calculation Results

All asphalt types and measurements

Total Area

0

sq ft (0 sq yd)

Volume (with compaction)

0

cu yd (0 cu ft)


All Asphalt Types Required

Note: Estimates include compaction factor. Material costs only - labor, equipment, and preparation costs are additional.

🔧 Irregular Asphalt Shape Calculator

Add multiple rectangular asphalt sections to calculate complex areas for your paving project

Step-by-Step Asphalt Area Visualization

Break complex asphalt shapes into simple rectangles

Each asphalt section becomes a separate rectangle

How to measure irregular asphalt shapes:

  1. Break your asphalt area into rectangular sections
  2. Measure each rectangle's length and width accurately
  3. Add each section using the form below for asphalt calculation
  4. The asphalt calculator will sum all areas automatically

📊 Asphalt Types & Project Comparison

Complete comparison of all asphalt types and recommended thickness for different projects

Complete Asphalt Types Comparison

Asphalt TypeDensity (tons/yd³)Weight (lbs/SY·IN)Best UseDescription
Hot Mix Asphalt (HMA)2.0110Driveways, RoadsMost common asphalt type for residential and commercial applications
Warm Mix Asphalt (WMA)1.9105Eco-friendly ProjectsLower temperature production, environmentally friendly option
Porous Asphalt1.8100Parking LotsAllows water drainage, ideal for storm water management
Recycled Asphalt (RAP)1.85102Budget ProjectsEnvironmentally friendly and cost-effective recycled option
Superpave Mix2.1115HighwaysHigh-performance asphalt designed for heavy traffic loads
Stone Matrix Asphalt (SMA)2.05112Heavy Traffic AreasDurable, rut-resistant surface for high-stress applications
Premium Dense Mix2.15118Premium ApplicationsMaximum durability and performance for critical infrastructure

Recommended Thickness by Project Type

🏠
Residential Driveway
2–3 inches
Light residential traffic, occasional heavy vehicles like delivery trucks
🅿️
Commercial Parking Lot
3–4 inches
Commercial traffic, regular heavy vehicles, daily loading and unloading
🛣️
Highway & Roads
6+ inches
Heavy traffic, continuous loading, maximum durability requirements

💡 Pro Tip: Always consult with local asphalt contractors and suppliers for specific recommendations based on your local climate, soil conditions, and traffic patterns.

📋 Thickness Guidelines

🏠 Residential Driveways

  • Standard: 2-3 inches
  • Heavy use: 3-4 inches
  • With heavy vehicles: 4+ inches

🏢 Commercial Areas

  • Parking lots: 3-4 inches
  • Loading areas: 4-6 inches
  • Industrial areas: 6+ inches

🛣️ Roads & Highways

  • Local roads: 4-6 inches
  • Highways: 6-8 inches
  • Heavy haul roads: 8+ inches

⚖️ Density Information

Standard Densities

  • Hot Mix Asphalt: 110 lbs/(SY·IN) or 2.0 tons/yd³
  • Warm Mix Asphalt: 105 lbs/(SY·IN) or 1.9 tons/yd³
  • Recycled Asphalt: 102 lbs/(SY·IN) or 1.85 tons/yd³
  • Superpave Mix: 115 lbs/(SY·IN) or 2.1 tons/yd³
  • Stone Matrix Asphalt: 112 lbs/(SY·IN) or 2.05 tons/yd³
  • Premium Dense Mix: 118 lbs/(SY·IN) or 2.15 tons/yd³

📏 Unit Conversions

  • 1 ton = 0.907 tonnes
  • 1 cubic yard = 27 cubic feet
  • 1 square yard = 9 square feet
  • 1 meter = 3.28084 feet
  • 1 inch = 2.54 cm

🔧 Compaction Factor

Typically 5-15% additional material is needed to account for compaction during paving. Our calculator uses 10% by default, which is standard for most projects.